Goodman 2 Ton 15.2 SEER2 AC System, 80% AFUE 60000 BTUh Gas Furnace, Upflow/Downflow Coil, R-32 Gas System

Overview of Goodman 2 Ton 15.2 SEER2 AC System with 60000 BTUh Gas Furnace and R-32 Coil

The Goodman 2 Ton 15.2 SEER2 AC System, 80% AFUE 60000 BTUh Gas Furnace, Upflow/Downflow Coil, R-32 Gas System is built for homes that need cooling, gas heating, and an indoor coil in one matched split system.

This Goodman system includes:

1. Goodman 2 Ton 15.2 SEER2 24000 BTUh R-32 AC Condenser GLXS4BA2410
2. Goodman 60000 BTUh 80% AFUE Single-Stage Multi-Speed R-32 ECM Gas Furnace GR9S800603BN
3. Goodman 2 Ton 24000 BTUh Upflow/Downflow Cased Evaporator Coil CAPTA2422B3

The outdoor condenser handles cooling, the indoor furnace provides gas heat, and the cased coil supports the cooling side of the system. This is a split HVAC system, not a Goodman gas package unit.

Specialty of Goodman 2 Ton 15.2 SEER2 AC and Gas Furnace System

1. Complete AC and Gas Furnace Setup

This system includes the main equipment needed for a 2 ton cooling system with gas heat. It is a practical option when you want a Goodman furnace and air conditioner setup without selecting each major component separately.

2. R-32 Cooling Performance

The Goodman GLXS4BA2410 condenser provides 24,000 BTUh nominal cooling capacity. With the right indoor match, this system can reach up to 15.2 SEER2 performance.

3. 60000 BTUh Gas Heating

The Goodman GR9S800603BN furnace provides 60,000 BTUh heating input and 48,000 BTUh heating output at 80% AFUE. The AC side is measured in tons, while the furnace is sized by BTUh.

4. Upflow/Downflow Cased Coil

The Goodman CAPTA2422B3 coil is designed for R-32 systems and upflow/downflow installation. It includes a factory-installed TXV to help regulate refrigerant flow in the matched system.

5. Built for Professional Installation

Before ordering, confirm the equipment match, furnace orientation, coil fit, line-set size, gas connection, electrical requirements, thermostat, condenser pad, disconnect, drain setup, and local code requirements with a licensed HVAC professional.

Goodman 2 Ton 15.2 SEER2 R-32 Gas System

I. Goodman 2 Ton 15.2 SEER2 24000 BTUh R-32 AC Condenser GLXS4BA2410

The Goodman GLXS4BA2410 is the outdoor condenser in this 2 ton system. It uses R-32 refrigerant, a single-stage rotary compressor, copper tube/enhanced aluminum fin coil, and a factory-installed filter drier.

This condenser is for cooling only. It must be matched with approved R-32 indoor equipment, such as a compatible evaporator coil or air handler.

Features of Goodman 2 Ton 15.2 SEER2 24000 BTUh R-32 AC Condenser GLXS4BA2410

1. 2 ton nominal cooling capacity with 24,000 BTUh output.
2. Up to 15.2 SEER2 performance with properly matched indoor equipment.
3. R-32 split system air conditioner condenser.
4. Single-stage rotary compressor for steady cooling.
5. Copper tube/enhanced aluminum fin coil.
6. Factory-installed filter drier helps protect the refrigerant system.
7. Fully charged for 15 feet of 3/8 inch liquid line.
8. Sweat connection service valves with accessible gauge ports.
9. Enclosed contactor and high-pressure switch.
10. Ground lug connection and extended-life capacitors.
11. Architectural Gray powder-paint cabinet finish.
12. Steel louver coil guard and wire fan discharge grille.
13. Top and side maintenance access.
14. AHRI Certified and ETL Listed.

Specifications of Goodman 2 Ton 15.2 SEER2 24000 BTUh R-32 AC Condenser GLXS4BA2410

AC Condenser Specifications

AC Condenser Electrical Data

AC Condenser Dimensions

AC Condenser Weight

II. Goodman 60000 BTUh 80% AFUE Single-Stage Multi-Speed R-32 ECM Gas Furnace GR9S800603BN

The Goodman GR9S800603BN is the gas furnace included in this system. It provides 60,000 BTUh heating input and 48,000 BTUh heating output at 80% AFUE.

This furnace uses a single-stage gas valve and a multi-speed ECM blower motor. It is not a two-stage or variable-speed furnace.

Features of Goodman 60000 BTUh 80% AFUE Single-Stage Multi-Speed R-32 ECM Gas Furnace GR9S800603BN

1. 60,000 BTUh heating input.
2. 48,000 BTUh heating output.
3. 80% AFUE gas heating efficiency.
4. Single-stage gas valve.
5. Multi-speed ECM blower motor.
6. Upflow/horizontal installation configuration.
7. 1200 CFM airflow rating.
8. 17.5 inch B cabinet.
9. Heavy-duty aluminized-steel tubular heat exchanger.
10. Durable silicon nitride hot-surface igniter.
11. Self-diagnostic control board with fault code LED output.
12. Color-coded low-voltage terminals.
13. Single-speed induced draft blower.
14. Natural gas operation with LP conversion available using the proper kit.
15. 4 inch vent connection.

Specifications of Goodman GR9S800603BN Gas Furnace

Gas Furnace General Specifications

Gas Furnace Electrical Data

Gas Furnace Dimensions

Gas Furnace Weight

III. Goodman 2 Ton 24000 BTUh Upflow/Downflow Cased Evaporator Coil CAPTA2422B3

The Goodman CAPTA2422B3 is the indoor cased evaporator coil included with this system. It is built for R-32 refrigerant, upflow/downflow installation, and 2 ton cooling applications.

A factory-installed TXV helps control refrigerant flow. The 17.5 inch cabinet width also makes it important to confirm furnace or air-handler fit before ordering.

Features of Goodman 2 Ton 24000 BTUh Upflow/Downflow Cased Evaporator Coil CAPTA2422B3

1. 2 ton cased evaporator coil.
2. 24,000 BTUh cooling capacity.
3. Upflow/downflow configuration.
4. R-32 refrigerant compatibility.
5. Factory-installed TXV.
6. All-aluminum evaporator coil.
7. R-32 sensor designed for the lifespan of the coil.
8. Painted cased cabinet.
9. Single front access panel.
10. Foil-faced insulation helps reduce cabinet condensation.
11. Rust-resistant thermoplastic drain pan.
12. Secondary drain connections.
13. AHRI Certified and ETL Listed.

Specifications of Goodman CAPTA2422B3 Cased Evaporator Coil

Cased Coil Specifications

Cased Coil Dimensions

Cased Coil Weight

Compatibility and Installation Note

This Goodman system is built around R-32 cooling equipment. The GLXS4BA2410 condenser and CAPTA2422B3 coil should be matched with approved R-32 components. The GR9S800603BN furnace supports the heating and airflow side of the system.

Before ordering, confirm the furnace orientation, coil fit, line-set size, airflow, gas connection, LP conversion needs, electrical requirements, thermostat, disconnect, condenser pad, drain setup, and final system match with a licensed HVAC professional.

This is not a Goodman gas package unit. It is a split system with an outdoor condenser, indoor gas furnace, and indoor evaporator coil.

Why Buy from Green Leaf Air?

Buy the Goodman 2 Ton 15.2 SEER2 AC System from Green Leaf Air when you want the condenser, furnace, and coil listed clearly before checkout. This helps you compare the included model numbers, cooling capacity, heating input, coil configuration, electrical data, dimensions, and weight in one place.

Green Leaf Air can help you review this Goodman furnace and AC system for replacement or new HVAC installation. You can order the equipment online, request professional installation support, or contact Green Leaf Air before buying if you need help confirming the right system match.