Trane 15.2 SEER2 Heat Pump Systems with Free Installation
Shop Trane 15.2 SEER2 heat pump systems from 1.5 to 5 tons for heating and cooling with one ducted system. Our current packages use R-454B single-stage Trane heat pumps with compatible air handlers and electric heat kits.
Prices range from $9,899 to $9,999 with free professional installation. Plus a 10-year parts warranty on applicable systems. We sell and install these systems within our Texas and North Carolina service areas.
Compare available sizes below. If you are unsure about tonnage or equipment compatibility, contact us before ordering so we can confirm the right system for your property.
Showing all 7 results
Popular Product
Most Popular Central A/C Units
Trane 15.2 SEER2 Heat Pump Prices by Tonnage
Our current Trane 15.2 SEER2 heat pump packages have a narrow price range across all seven available sizes.
| Heat Pump Size | Cooling Capacity | Current Package Price |
| 1.5 ton | 18,000 BTU | $9,899 |
| 2 ton | 24,000 BTU | $9,899 |
| 2.5 ton | 30,000 BTU | $9,899 |
| 3 ton | 36,000 BTU | $9,999 |
| 3.5 ton | 42,000 BTU | $9,999 |
| 4 ton | 48,000 BTU | $9,999 |
| 5 ton | 60,000 BTU | $9,999 |
The displayed package price includes professional installation.
You can also compare the full range of Trane heat pump systems if you are still deciding on an efficiency level.
What Is Included in a Trane 15.2 SEER2 Heat Pump System?
Each system in this category combines the major equipment needed for a ducted heat pump setup:
- Trane R-454B heat pump for cooling and heating
- Compatible Trane air handler for indoor airflow and heat transfer
- Electric heat kit for supplemental heat
- Professional installation
The air handler and electric heat-kit configuration varies by system size. Check the individual product before ordering to see the exact equipment included with that package.
Is 15.2 SEER2 Worth Choosing Over 14.3 SEER2?
The decision is mainly a tradeoff between initial price, efficiency, equipment configuration, and comfort priorities.
Our current 14.3 SEER2 Trane heat pump systems provide the lower-cost entry point. Current 15.2-tier systems cost roughly $600 to $700 more than comparable 14.3-tier sizes in our catalog.
What we cannot tell you from the SEER2 number alone is exactly how much money the higher rating will save at your property. Actual electricity use depends on cooling load, heating load, weather, runtime, thermostat settings, duct condition, equipment sizing, electricity rates, and the system being replaced.
The 15.2 tier makes the most sense when you want to move above the base efficiency option while retaining a single-stage outdoor heat pump and keeping the installed price below Green Leaf Air’s higher-stage Trane systems.
If you want to compare higher-efficiency equipment and different operating stages, explore our Trane 16 SEER2 heat pump systems, Trane 17 SEER2 heat pump systems, and Trane 18 SEER2 heat pump systems.
Choose the Right Trane Heat Pump Size
These systems are available from 1.5 tons to 5 tons, or approximately 18,000 to 60,000 BTU of cooling capacity.
Do not choose tonnage from square footage alone.
Proper heat pump sizing should account for factors such as:
- insulation
- windows and sun exposure
- air leakage
- ceiling height
- ductwork
- building orientation
- heating and cooling load
- local design temperatures
A load calculation provides a better basis for sizing than a simple square-footage chart.
If you are replacing an existing HVAC system, do not assume the replacement must have the same tonnage. The old system may have been incorrectly sized, or changes to insulation, windows, additions, or other building conditions may have changed the load.
If you are unsure, contact Green Leaf Air before ordering.
Professional Installation Is Included
Green Leaf Air includes professional HVAC installation with these complete Trane heat pump packages.
The price displayed in the product grid is the installed package price, so you do not need to add a separate standard installation charge to the listed system price.
We install these systems within our service areas in Texas and North Carolina.
10-Year Parts Warranty and Financing
These Trane systems include a 10-year parts warranty.
If you prefer to spread the purchase cost over time, Green Leaf Air also offers HVAC financing options, subject to approval and current financing terms.
Review the individual product and financing details before purchasing so you know exactly what applies to your system.
Trane 15.2 SEER2 Heat Pump FAQs
How much does a Trane 15.2 SEER2 heat pump system cost?
Current Green Leaf Air prices range from $9,899 to $9,999 with free professional installation. The 1.5, 2, and 2.5 ton systems are currently $9,899. The 3, 3.5, 4, and 5 ton systems are $9,999.
What sizes are available?
Current options include 1.5, 2, 2.5, 3, 3.5, 4, and 5 ton systems.
Is installation included in the listed price?
Yes. Professional installation is included in the displayed package price for these complete systems.
Are these Trane heat pumps single-stage?
Yes. The current outdoor heat pumps in this 15.2 SEER2 category use single-stage compressor operation.
How do I know which tonnage I need?
The correct tonnage depends on the property’s heating and cooling load, not square footage alone. Insulation, windows, air leakage, ductwork, orientation, ceiling height, climate, and other building conditions affect sizing. Contact us if you need help choosing the right size.
Need Help Choosing the Right Trane Heat Pump?
If you already know your required tonnage, compare the available systems above.
If you are unsure about sizing, equipment compatibility, or which Trane efficiency level makes sense for your property, contact Green Leaf Air before ordering. We can help you confirm the correct system for installation in Texas or North Carolina.