Trane 3.5 Ton 15.2 SEER2 Single-Stage AC System, 80% AFUE 80000 BTU Gas Furnace, Multi-Positional Coil, R-454B Gas System [with Install]

Trane 3.5 Ton 15.2 SEER2 Single-Stage AC System, 80% AFUE 80000 BTU Gas Furnace, Multi-Positional Coil, R-454B Gas System [with Install]

The Trane 3.5 Ton 15.2 SEER2 gas system combines cooling, gas heating, and indoor heat transfer equipment in one matched HVAC package. It is a practical choice for homeowners buying a complete Trane HVAC system with installation rather than sourcing the outdoor AC unit, furnace, and evaporator coil separately.

This Trane 3.5 Ton single-stage gas system includes three main heating and cooling components:

1. Trane 3.5 Ton 15.2 SEER2 42,000 BTU R-454B Single-Stage Air Conditioner Condenser 5TTR5042A1000
2. Trane 80,000 BTU S8X1 80% AFUE Single-Stage Gas Furnace S8X1C080M5PSC
3. Trane 3 to 5 Ton R-454B Multi-Positional Cased Coil 5TXCC007AS3HC

Professional installation is included with this complete Trane AC and gas furnace package. Before ordering, Green Leaf Air can confirm the required system size, installation orientation, electrical requirements, gas configuration, and any property-specific work.

Trane 3.5 Ton 15.2 SEER2 Gas System

Specification	Details
HVAC Bundle	Complete Split Gas System
Nominal Cooling Capacity	3.5 Ton
SEER2 Rating	15.2 SEER2
EER2 Rating	12.0 EER2
AHRI Matched Cooling Capacity	42,500 BTUh
Outdoor AC Condenser Unit	Trane 5TTR5042A1000
Indoor Gas Furnace Unit	Trane S8X1C080M5PSC
Cased Coil Unit	Trane 5TXCC007AS3HC
Refrigerant	R-454B
Cooling Stage	Single Stage
Heating Stage	Single Stage
Furnace Efficiency	80% AFUE
AHRI Certificate	215475922
Installation	Professional installation included

The 15.2 SEER2 and 12.0 EER2 ratings apply to the complete AHRI-matched system. Actual operating costs will depend on climate, thermostat settings, insulation, duct condition, installation quality, and household usage.

1. Trane 3.5 Ton 15.2 SEER2 42000 BTUh AC Condenser 5TTR5042A1000

The Trane 5TTR5042A1000 is a 3.5 ton outdoor AC unit with a single-stage scroll compressor and R-454B refrigerant. It supplies the cooling side of this matched gas system and works with the included Trane coil and furnace blower.

• Upgraded outdoor fan motor supports steady airflow across the condenser coil
• Quick-Sess cabinet provides service access while protecting the coil
• Single-stage Climatuff Scroll Compressor provides consistent cooling output
• All-aluminum Spine Fin Coil supports heat transfer with low airflow resistance
• Full-sided galvanized steel louvered panels protect the outdoor coil
• Weather-resistant powder-painted cabinet helps resist rust and outdoor exposure
• Corrosion-resistant Weatherguard fasteners protect exterior connection points
• DuraTuff rust-resistant base pan will not crack, corrode, or warp
• Factory-installed pressure controls help protect the refrigeration system
• R-454B refrigerant meets current residential HVAC refrigerant requirements

AC Condenser Specifications

Specification	Details
Brand	Trane
Series	15 Single-Stage Air Conditioner
Model	5TTR5042A1000
Equipment Type	Outdoor AC Condenser
Nominal Capacity	3.5 Ton
Cooling Capacity	42,000 BTUh
System SEER2 Rating	Up to 15.2 SEER2 with the qualifying matched system
Cooling Stages	Single Stage
Compressor Type	Scroll
Refrigerant	R-454B
Minimum Circuit Ampacity	19 amps for A suffix, 23 amps for B suffix
Maximum Breaker or Fuse	30 amps for A suffix, 40 amps for B suffix
Voltage	208/230 Volts
Phase	Single Phase
Frequency	60 Hz
Dimensions	37-1/8 inches H x 37-1/4 inches W x 34-1/4 inches D
Net Weight	Approximately 212 lbs
Liquid Line Connection	5/16 inch
Gas Line Connection	7/8 inch
Factory Refrigerant Charge	Approximately 5 lbs 1 oz
Published Sound Power Level	71 dBA
ENERGY STAR Qualification	Based on the complete AHRI-certified system and regional requirements

The full condenser model suffix must be checked before choosing the breaker, disconnect, or wiring. The A and B versions have different electrical requirements.

2. Trane 80000 BTUh 80% AFUE S8X1 Single-Stage Gas Furnace S8X1C080M5PSC

The Trane S8X1C080M5PSC is an 80,000 BTUh input, single-stage gas furnace with an 80% AFUE rating. It provides the heating portion of this complete Trane HVAC system and supplies airflow for the indoor evaporator coil during cooling operation.

• Silicon nitride hot surface igniter supports consistent burner ignition
• Heavy-gauge tubular aluminized steel heat exchanger transfers heat into the supply air
• Nine-speed constant-torque ECM blower allows airflow to be set for the matched AC system
• Multi-port in-shot burners shape the flame for controlled heat transfer
• Integrated system controller monitors the flame, blower, gas valve, and furnace limits
• Built-in diagnostic controls help technicians identify operating and service issues
• Heavy steel cabinet provides a rigid enclosure for the furnace components
• Air-Tite cabinet construction helps limit cabinet air leakage
• Four-way configuration supports upflow, downflow, horizontal-left, and horizontal-right installations
• Furnace can be converted for propane use with the correct approved conversion kit

Gas Furnace Specifications

Specification	Details
Brand	Trane
Series	S8X1 Series
Model	S8X1C080M5PSC
Furnace Type	Non-Condensing Gas Furnace
Heating Input Capacity	80,000 BTUh
Heating Output Capacity	64,700 BTUh
AFUE	80%
Heating Stages	Single Stage
Blower Motor	Nine-Speed Constant-Torque ECM
Installation Positions	Upflow, Downflow, Horizontal Left, Horizontal Right
Voltage	120 Volts
Phase	Single Phase
Frequency	60 Hz
Minimum Circuit Ampacity	Approximately 14.1 to 14.2 amps
Maximum Overcurrent Protection	15 amps
Gas Pipe Connection	1/2 inch
Dimensions	34 inches H x 21 inches W x 28.75 inches D
Net Weight	Approximately 134 lbs

3. Trane 3 to 5 Ton Downflow/Horizontal/Upflow Cased Coil 5TXCC007AS3HC

The Trane 5TXCC007AS3HC is an R-454B cased evaporator coil selected to work with the 3.5 ton outdoor AC condenser in this matched system. Its multi-positional cabinet supports common furnace and duct configurations, giving the installer more flexibility when replacing an existing AC and gas furnace system.

• All-aluminum plate-fin coil construction supports heat transfer and corrosion resistance
• Factory-installed non-bleed TXV regulates refrigerant entering the coil
• Internal check valve supports the required refrigerant flow
• R-454B-compatible refrigerant connections
• Multi-positional design supports upflow, downflow, horizontal-left, and horizontal-right installation
• Non-corrosive drain pan directs condensate toward the drain connection
• 3/4-inch NPT condensate drain connection
• Cased cabinet protects the evaporator coil during installation and operation
• 21-inch cabinet width matches the included S8X1C furnace without a width adapter
• Brazed refrigerant connections provide secure field piping connections

Cased Coil Specifications

Specification	Details
Brand	Trane
Series	5TXC Series
Model	5TXCC007AS3HC
Equipment Type	Cased Evaporator Coil
Compatible Refrigerant	R-454B
Application Range	3 to 5 Ton
Matched System Size	3.5 Ton
Coil Type	Aluminum Plate Fin
Refrigerant Control	Factory-Installed Non-Bleed TXV
Internal Check Valve	Yes
Configuration	Upflow, Downflow, Horizontal Left, Horizontal Right
Gas Line Size	7/8 inch
Liquid Line Size	3/8 inch
Drain Connection	3/4-inch NPT
Dimensions	26-3/4 inches H x 21 inches W x 21-1/2 inches D
Net Weight	Approximately 61 lbs

Why Buy from Green Leaf Air?

Buying a complete HVAC system requires more than choosing the correct tonnage from an online listing. The outdoor condenser, furnace, evaporator coil, airflow settings, refrigerant piping, electrical service, gas connection, and duct configuration must work together.

Green Leaf Air provides the equipment and professional installation through one purchase, reducing the risk of ordering components that do not match.

• Complete Trane AC unit, gas furnace, and cased coil package
• Professional HVAC installation included
• Compatibility and sizing assistance before purchase
• R-454B equipment matching and installation support
• Free 10-year parts warranty offer
• Free 5-year labor warranty
• Financing available for qualified buyers
• Installation support in Green Leaf Air service areas
• One point of contact for equipment and installation questions
• Phone support before ordering at (972) 992-5006

Installation requirements differ from one property to another. Before placing the order, confirm whether the quoted installation covers the existing refrigerant lines, thermostat, equipment pad, drain work, duct transitions, electrical changes, gas-line changes, permits, code upgrades, and removal of the old equipment.

Frequently Asked Questions

1. What is the energy efficiency of the Trane 3.5 Ton 15.2 SEER2 Gas System?

The AHRI-matched system is rated at 15.2 SEER2 and 12.0 EER2 for cooling. The included furnace has an 80% AFUE rating, which means approximately 80% of the furnace’s fuel energy is converted into delivered heat under standard test conditions.

Home energy costs will still depend on climate, utility rates, thermostat settings, insulation, duct leakage, and installation quality.

2. Is the Trane S8X1 80000 BTU gas furnace energy efficient?

The S8X1 is an 80% AFUE non-condensing furnace. It is usually considered when the homeowner wants a lower equipment and installation cost than a high-efficiency condensing furnace, or when the existing venting and mechanical-space layout are better suited to an 80% furnace.

Its 80,000 BTUh rating refers to fuel input. The published heating output is approximately 64,700 BTUh.

3. What type of refrigerant does this Trane AC system use?

This Trane AC and gas furnace system uses R-454B refrigerant. The outdoor condenser and indoor cased coil are both made for R-454B operation.

R-454B equipment should not be mixed with an indoor coil designed only for R-410A. Refrigerant compatibility, line sizing, charging, and required safety components should be confirmed by the installer.

4. Is this Trane HVAC system ENERGY STAR certified?

The complete matched system may qualify for ENERGY STAR certification when installed using the equipment combination listed on the applicable AHRI certificate. Certification and rebate eligibility should be verified using the current AHRI record and the requirements for the installation location.

ENERGY STAR status should not be assigned to the outdoor condenser by itself because system efficiency depends on the complete indoor and outdoor equipment match.

5. Can this system be installed in any home layout?

The furnace and cased coil support upflow, downflow, horizontal-left, and horizontal-right configurations. This covers many residential installations, but it does not mean the package will fit every property without modification.

Available mechanical-room space, duct dimensions, return-air configuration, furnace venting, gas supply, electrical service, drain routing, and local codes must be reviewed before installation.

6. How quiet is the Trane gas furnace and AC condenser during operation?

Trane publishes a 71 dBA sound-power rating for the 5TTR5042A condenser. Actual sound at the property will depend on the installation location, distance from windows, equipment pad, surrounding walls, refrigerant piping, and maintenance condition.

The furnace uses an ECM blower and an Air-Tite steel cabinet. Correct airflow setup is important because excessive static pressure can increase indoor airflow noise.

7. What is included in this complete Trane HVAC system package?

This package includes:

1. Trane 5TTR5042A1000 3.5 ton R-454B outdoor AC condenser
2. Trane S8X1C080M5PSC 80,000 BTUh 80% AFUE gas furnace
3. Trane 5TXCC007AS3HC multi-positional R-454B cased coil
4. Professional installation

A free 10-year parts warranty offer, free 5-year labor warranty, and financing options are also displayed with the package.

Because installation conditions vary, Green Leaf Air should confirm any additional work or materials after reviewing the existing HVAC system and property.

8. What are the benefits of a single-stage gas furnace like the S8X1?

A single-stage furnace operates at its full heating output whenever there is a call for heat. The design has fewer operating stages than a two-stage furnace and generally carries a lower initial purchase price.

The S8X1 also uses a nine-speed constant-torque ECM blower, allowing the installing technician to select airflow that matches the cooling system and duct conditions.

9. How durable is this Trane system in harsh weather conditions?

The outdoor condenser has full-sided galvanized steel louvered panels, a weather-resistant powder-painted cabinet, corrosion-resistant fasteners, and a DuraTuff base pan. These parts protect the coil and cabinet from routine outdoor exposure.

The outdoor unit must still be installed with the required clearances and kept free of leaves, grass, snow, and other airflow restrictions. Properties near saltwater may require additional corrosion-protection measures.

10. Who should consider this Trane 3.5 Ton system?

This package is intended for homeowners whose load calculation supports a 3.5 ton cooling system and whose heating requirements are suitable for an 80,000 BTUh input furnace.

Square footage alone should not be used to select an AC unit. Climate, ceiling height, insulation, window area, orientation, air leakage, occupancy, and ductwork can significantly change the required capacity.

Homeowners planning a complete Trane AC replacement in Dallas, Greensboro, Wilmington, or another Green Leaf Air installation area can contact the company for sizing, compatibility, financing, and installation information before ordering.