Trane XV18 Series 5 Ton 18 SEER2 60000 BTUh Variable-Speed Communicating Heat Pump 4TWV8X60A1000A
The Trane XV18 4TWV8X60A1000A is a 5 ton variable-speed communicating heat pump that provides both cooling and electric heating. This R-410A outdoor heat pump AC unit has a nominal capacity of 60,000 BTUh and can reach up to 18.0 SEER2 and 8.5 HSPF2 when paired with qualifying Trane indoor equipment.
Its inverter-driven Climatuff Scroll Compressor adjusts output as demand changes, helping maintain steadier temperatures, better humidity control, and lower operating sound than a standard single-stage system. The all-aluminum Spine Fin Coil supports efficient heat transfer, while the louvered steel cabinet, DuraTuff base pan, WeatherGuard fasteners, and powder-painted finish protect the unit outdoors.
This listing includes the outdoor heat pump only. A compatible Trane communicating air handler or furnace and coil, system control, thermostat, and installation materials are sold separately unless listed as part of a package.
The 4TWV8X60A1000A uses R-410A refrigerant and must be paired with compatible R-410A indoor equipment. It should not be connected to equipment designed only for R-454B.
Trane CleanEffects whole-home air filtration can be added to a compatible indoor system, but it is not included with this outdoor unit.
Features of Trane 5 Ton 18 SEER2 XV18 60000 BTUh Variable-Speed Communicating Heat Pump 4TWV8X60A1000A
- Inverter-driven Climatuff Variable-Speed Scroll Compressor
- Variable-capacity heating and cooling
- Up to 18.0 SEER2 and 8.5 HSPF2 with qualifying matched equipment
- Communicating system capability
- All-aluminum Spine Fin outdoor coil
- Variable-speed outdoor fan motor
- Compressor sound enclosure
- Quick-Sess cabinet with full coil protection
- Galvanized steel louvered panels
- Weather-resistant powder-painted cabinet
- DuraTuff rust-resistant base pan
- High- and low-pressure system protection
- R-410A refrigerant
Specifications of Trane 5 Ton 18 SEER2 XV18 60000 BTU Outdoor Variable-Speed Heat Pump 4TWV8X60A1000A
Heat Pump Specifications
| Specification | Details |
| Brand | Trane |
| Series | XV18 TruComfort |
| Model | 4TWV8X60A1000A |
| Equipment Type | Outdoor Split-System Heat Pump |
| Nominal Capacity | 5 Ton |
| Cooling Capacity | 60,000 BTUh |
| Compressor | Climatuff Variable-Speed Scroll |
| Operation | Inverter Driven |
| Outdoor Fan Motor | Variable Speed, 1/3 HP |
| Outdoor Coil | Spine Fin |
| Refrigerant | R-410A |
| Factory Charge | Approximately 13 lbs 2 oz |
| Cooling Efficiency | Up to 18.0 SEER2 |
| Heating Efficiency | Up to 8.5 HSPF2 |
| EnergyGuide Rating | 14.3 SEER2 for the tested match |
| Cooling Sound Range | 57 to 73 dBA |
| Heating Sound Range | 61 to 74 dBA |
| Communicating System | Yes |
| Installation | Professional installation required |
Final efficiency depends on the approved indoor equipment, airflow, system controls, and AHRI-certified equipment match.
Heat Pump Electrical Data
| Specification | Details |
| Voltage | 208/230 Volts |
| Phase | Single Phase |
| Frequency | 60 Hz |
| Minimum Circuit Ampacity | 37 Amps |
| Maximum Breaker or Fuse | 50 Amps |
| Compressor RLA | 27.5 Amps |
| Outdoor Fan Motor FLA | 2.8 Amps |
Electrical wiring and overcurrent protection must follow the unit nameplate and local code.
Heat Pump Dimensions
| Specification | Details |
| Gas Line Connection | 7/8 Inch |
| Liquid Line Connection | 3/8 Inch |
| Height | Approximately 45 Inches |
| Width | Approximately 37 Inches |
| Depth | Approximately 34 Inches |
| Maximum Line Length | 150 Feet |
| Maximum Vertical Lift | 50 Feet |
Existing refrigerant lines should be inspected before installation to confirm proper size, condition, length, and compatibility.
Heat Pump Weight
| Specification | Details |
| Net Weight | Approximately 259 Pounds |
| Shipping Weight | Approximately 285 Pounds |
Why Buy from Green Leaf Air?
Green Leaf Air can help confirm the correct indoor equipment, communicating controls, and installation requirements before you buy the Trane XV18 heat pump.
- Online pricing for the exact Trane model
- Financing options for qualified buyers
- Pre-purchase compatibility assistance
- Professional installation in available service areas
- Help selecting a matched air handler, furnace, coil, and control
- Licensed and insured HVAC service
- One point of contact for equipment and installation support
- Phone assistance at (972) 992-5006
Before ordering, confirm whether the purchase is for equipment only or a complete installed system. Indoor equipment, thermostat, controls, refrigerant lines, electrical work, permits, equipment pads, and removal of the existing system are not included unless specifically listed.
Eligible installations may qualify for Trane’s registered limited warranty when the equipment is registered within the required period.
Reviews
There are no reviews yet.