Trane 5 Ton 14.3 SEER2 (≈13.8 SEER2) Single-Stage 60000 BTU R-454B Air Conditioner Condenser 5TTR4060A1000

Trane 5 Ton AC Condenser Overview

The Trane 5 Ton AC condenser 5TTR4060A1000 is a 60,000 BTU single-stage outdoor condensing unit designed for properly matched split-system air conditioning applications. This listing is specifically for the outdoor AC condenser. It is not a complete HVAC system and it is not a heat pump.

This 5-ton condenser uses R-454B refrigerant and combines a Climatuff® scroll compressor with Trane’s Spine Fin™ outdoor coil. The EnergyGuide associated with the 5TTR4060A1 model family shows a 13.8 SEER2 rating, while Trane lists the 14 Single-Stage Air Conditioner family at up to 14.3 SEER2. Actual system efficiency depends on the approved indoor coil and matched system combination.

The shorter 5TTR4060 reference represents the model-family and capacity portion of the full model number. This product listing is specifically for model 5TTR4060A1000.

Full-sided galvanized steel louvered panels help protect internal components while maintaining airflow. Weather-resistant cabinet components, the DuraTuff™ basepan and Quick-Sess cabinet add protection for the outdoor coil and internal equipment.

Key Features

Full-Sided Galvanized Steel Louvered Panels: Help protect internal components while preserving airflow around the outdoor coil.

Climatuff® Scroll Compressor: Single-stage scroll compressor used for the cooling operation of this 5TTR4 condenser.

Spine Fin™ Condenser Coil: All-aluminum outdoor coil designed for effective heat transfer and resistance to outdoor corrosion.

R-454B Refrigerant: Uses Trane’s current lower-GWP R-454B refrigerant platform.

Quick-Sess Cabinet: Provides full coil protection while allowing service access to the outdoor unit.

DuraTuff™ Rust-Proof Basepan: Designed to resist cracking, corrosion, rust and warping.

WeatherGuard™ Zinc-Coated Fasteners: Help resist corrosion from outdoor exposure.

Baked-On Powder-Paint Finish: Provides additional exterior protection against rust and corrosion.

Optional WeatherGuard™ Top: An optional protective top is available for applicable Trane 14 Single-Stage units.

Trane 5TTR4060A1000 Specifications

Why Buy from Green Leaf Air

Green Leaf Air provides product-specific information and current on-page pricing for the Trane 5TTR4060A1000 along with access to related HVAC equipment options. If you are building a complete split system, compatible indoor equipment should be selected and verified before ordering rather than assuming that any 5-ton coil, furnace or air handler will work with this condenser.

Trane 5 Ton AC Condenser Price

The price displayed on this product page applies to the Trane 5TTR4060A1000 outdoor AC condenser listing. It should not be interpreted as the price of a complete 5-ton HVAC system.

An indoor coil, furnace, air handler, thermostat, accessories, ductwork and installation are separate parts of a complete HVAC project and should not be assumed to be included with a condenser-only listing unless they are specifically stated in the selected order.

A complete HVAC system will therefore have different equipment requirements and pricing than this standalone Trane 5 Ton condenser.

Who Is This Trane 5 Ton AC Condenser For?

The 5TTR4060A1000 is intended for properly designed split air-conditioning applications requiring a nominal 5-ton, 60,000 BTU outdoor condenser.

Tonnage should not be selected from square footage alone. Correct sizing depends on cooling load, climate, insulation, windows, ductwork, building characteristics, indoor equipment and overall system design.

Compatibility and Installation Note

This listing is for the outdoor AC condenser only. The 5TTR4060A1000 must be paired with compatible indoor equipment designed for the same refrigerant and approved system application.

Indoor coil, air handler or furnace-and-coil compatibility should be confirmed using Trane matching information and AHRI-rated combinations where applicable. R-454B refrigerant compatibility, correct system sizing, electrical requirements, refrigerant line sizing, controls and other system components must also be verified before installation.

Do not assume universal compatibility based only on tonnage or a similar Trane model number. Installation must follow Trane requirements and applicable local codes and should be completed by a qualified HVAC professional.