Goodman 2 Ton 15.2 SEER2 24000 BTUh R-32 AC Condenser GLXS4BA2410

Goodman GLXS4BA2410 2 Ton AC Condenser Overview

The Goodman 2 Ton 15.2 SEER2 24000 BTUh R-32 AC Condenser GLXS4BA2410 is a cooling-only outdoor unit made for residential split AC systems. It provides 24,000 BTUh nominal cooling capacity and can reach up to 15.2 SEER2 when paired with properly matched indoor equipment.

This condenser uses R-32 refrigerant, a single-stage rotary compressor, copper tube/enhanced aluminum fin coil, and a factory-installed filter drier. For homeowners replacing an older outdoor AC unit or building a new central cooling system, this model offers a compact cabinet, dependable cooling output, and service-friendly access.

This listing is for the outdoor condenser only. A compatible R-32 evaporator coil or R-32 air handler is required to complete the system.

Features of Goodman 2 Ton 15.2 SEER2 24000 BTUh R-32 AC Condenser GLXS4BA2410

• 2 ton cooling capacity with 24,000 BTUh nominal output.
• Up to 15.2 SEER2 efficiency with the right indoor equipment match.
• R-32 refrigerant for current split AC system applications.
• Single-stage rotary compressor for steady cooling performance.
• Copper tube/enhanced aluminum fin coil with 5mm diameter.
• Factory-installed filter drier helps protect the refrigerant system from moisture and debris.
• Fully charged for 15 feet of 3/8 inch liquid line.
• Sweat connection service valves with accessible gauge ports.
• Enclosed contactor and high-pressure switch.
• Ground lug connection and extended-life capacitors.
• Architectural Gray powder-paint cabinet finish.
• Steel louver coil guard and wire fan discharge grille.
• Top and side access for easier maintenance.
• AHRI Certified and ETL Listed.
• 10-year parts limited warranty with proper online registration, based on Goodman warranty terms.

Specifications of Goodman 2 Ton 15.2 SEER2 24000 BTUh R-32 AC Condenser GLXS4BA2410

AC Condenser Specifications

Specification	Details
Brand	Goodman
Model	GLXS4BA2410
Official Model Column	GLXS4BA2410A*
Product Type	R-32 Split System Air Conditioner Condenser
Nominal Capacity	2 Ton
Cooling Capacity	24,000 BTU/h
Efficiency	Up to 15.2 SEER2 with matched equipment
Sound Rating	74 dBA
Compressor Stage	Single
Compressor Type	Rotary
Compressor RLA	8.2
Compressor LRA	41.2
Condenser Fan Motor Type	PSC
Horsepower	1/8 HP
Condenser Fan Motor FLA	0.70
Refrigerant	R-32
Refrigerant Charge	53 oz

AC Condenser Electrical Data

Specification	Details
Voltage	208/230 Volts
Phase	1
Frequency	60 Hz
Minimum Circuity Ampacity	10.9 Amps
Breaker Circuit Prot. Rtg. Maximum	15 Amps

AC Condenser Dimensions

Specification	Details
Line Size IN. O.D. Gas	3/4 Inches
Line Size IN. O.D. Liquid	3/8 Inches
Condenser Height	27 Inches
Condenser Width	26 Inches
Condenser Depth	26 Inches

AC Condenser Weight

Specification	Details
Product Weight	117 Pounds
Shipping Weight	132 Pounds

The GLXS4BA2410 measures 27 inches high, 26 inches wide, and 26 inches deep. Its product weight is 117 pounds, with a shipping weight of 132 pounds.

Why Buy Goodman GLXS4BA2410 from Green Leaf Air?

Choose this Goodman 2 ton R-32 condenser from Green Leaf Air when you want the main product details clearly listed before placing your order. The page gives you the model number, cooling capacity, electrical requirements, line sizes, dimensions, and weight in one place, which makes comparison easier before checkout.

Green Leaf Air can also help if you need to confirm whether this condenser is the right fit for your existing indoor coil, air handler, or new central AC setup. Since this is a condenser-only product, matching it with the correct R-32 indoor equipment is important.

You can order the condenser online, review the specifications, and contact Green Leaf Air before buying if you need help checking compatibility.

Compatibility and Installation Note

The Goodman GLXS4BA2410 is an R-32 cooling-only condenser. It should be matched with approved R-32 indoor equipment, such as a compatible evaporator coil or air handler. It is not an R-410A condenser, so avoid pairing it with older R-410A indoor equipment unless a licensed HVAC installer confirms a valid system match.

Before ordering, confirm the indoor equipment, line-set size, condenser pad, disconnect, thermostat, electrical requirements, and final AHRI match with your installer. Professional installation helps protect cooling performance, safety, and warranty coverage.