Goodman 1.5 Ton 15.2 SEER2 R-32 AC Condenser GLXS4BA1810

Goodman GLXS4BA1810 1.5 Ton AC Condenser Overview

The Goodman 1.5 Ton 15.2 SEER2 R-32 AC Condenser GLXS4BA1810 is a cooling-only outdoor condenser for smaller residential split AC systems. It provides 18,000 BTUh cooling capacity and can reach up to 15.2 SEER2 when paired with properly matched indoor equipment.

This condenser uses R-32 refrigerant, a single-stage rotary compressor, copper tube/enhanced aluminum fin coil, and a factory-installed filter drier. It is a practical choice for replacing an older outdoor AC unit or setting up a new central air system where a 1.5 ton condenser is the right size.

This listing is for the outdoor condenser only. A compatible R-32 evaporator coil or R-32 air handler is required to complete the split AC system.

Features of Goodman 1.5 Ton 15.2 SEER2 R-32 AC Condenser GLXS4BA1810

• 1.5 ton cooling capacity with 18,000 BTUh nominal output.
• Up to 15.2 SEER2 performance with matched indoor equipment.
• R-32 refrigerant for current split AC system applications.
• Single-stage rotary compressor for steady cooling operation.
• Copper tube/enhanced aluminum fin coil with 5mm diameter.
• Factory-installed filter drier helps protect the refrigerant system from moisture and debris.
• Fully charged for 15 feet of 3/8 inch liquid line.
• Sweat connection service valves with accessible gauge ports.
• Enclosed contactor and high-pressure switch.
• Ground lug connection and extended-life capacitors.
• Architectural Gray powder-paint cabinet finish.
• Wire fan discharge grille and steel louver coil guard.
• Top and side access for easier maintenance.
• AHRI Certified and ETL Listed.
• 10-year parts limited warranty with proper online registration, based on Goodman warranty terms.

Specifications of Goodman 1.5 Ton 15.2 SEER2 R-32 AC Condenser GLXS4BA1810

AC Condenser Specifications

Specification	Details
Brand	Goodman
Model	GLXS4BA1810
Product Type	R-32 Split System Air Conditioner Condenser
Nominal Capacity	1.5 Ton
Cooling Capacity	18,000 BTU/h
Efficiency	Up to 15.2 SEER2 with matched equipment
Sound Rating	74 dBA
Compressor Stage	Single
Compressor Type	Rotary
Compressor RLA	8.2 Amps
Compressor LRA	41.2 Amps
Condenser Fan Motor Type	PSC
Horsepower	1/8 HP
Condenser Fan Motor FLA	0.70 Amps
Refrigerant	R-32
Airflow Rating	625 CFM

AC Condenser Electrical Data

Specification	Details
Voltage	208/230 Volts
Phase	1
Frequency	60 Hz
Minimum Circuity Ampacity	10.9 Amps
Breaker Circuit Prot. Rtg. Maximum	15 Amps

AC Condenser Dimensions

Specification	Details
Line Size IN. O.D. Gas	3/4 Inches
Line Size IN. O.D. Liquid	3/8 Inches
Condenser Height	27 Inches
Condenser Width	26 Inches
Condenser Depth	26 Inches

AC Condenser Weight

Specification	Details
Product Weight	117.25 Pounds
Shipping Weight	132 Pounds

The GLXS4BA1810 has a compact cabinet size of 27 inches high, 26 inches wide, and 26 inches deep. The unit weight is 117.25 pounds, and the listed shipping weight is 132 pounds.

Why Buy Goodman GLXS4BA1810 from Green Leaf Air?

Choose the Goodman GLXS4BA1810 from Green Leaf Air when you want the key product details clearly listed before placing your order. You can review the cooling capacity, refrigerant type, electrical data, line sizes, dimensions, and weight in one place.

Green Leaf Air can also help you check whether this 1.5 ton R-32 condenser is the right match for your indoor coil, air handler, or new central AC setup. Since this is a condenser-only product, proper equipment matching matters before installation.

You can order the condenser online, review the specifications, and contact Green Leaf Air before buying if you need help confirming compatibility.

Compatibility and Installation Note

The Goodman GLXS4BA1810 is an R-32 cooling-only condenser. It should be matched with approved R-32 indoor equipment, such as a compatible evaporator coil or air handler. It is not an R-410A condenser, so avoid pairing it with older R-410A indoor equipment unless a licensed HVAC installer confirms a valid system match.

Before ordering, confirm the indoor equipment, line-set size, condenser pad, disconnect, thermostat, electrical requirements, and final AHRI match with your installer. Professional installation helps protect cooling performance, safety, and warranty coverage.