If your HVAC is giving you problems, tour your home before calling a technician. Determine which rooms feel cold and which feel hot. This will help your contractor quickly determine where the issue lies and how to get it fixed quickly and easily.
Having a great HVAC system that works well can make a home run better. The heat in the winter and cool air in the summer are very refreshing to come home to. If your system breaks, it can be very frustrating. You must learn how to properly maintain your HVAC, and the following article has some basic info for you.
Before you choose someone to do HVAC work, figure out what they need to do for you. A contractor will be hard pressed to provide you with an over-the-phone estimate if unfamiliar with your system. If you can’t explain anything to them, this will be even more difficult. Know the right information ahead of time.
Know what type of system you currently have before calling someone to fix it. Know what the manufacturer’s name is, which particular model you have and what’s gone on with the unit in the past. Then, you’ll be ready to tell the contractor what they need to know.
Help the outside condenser fan run efficiently by cleaning the coils and fan blades before the summer starts. Always turn the unit off before you do anything to it, including leaning. Clean the outside of your condenser unit regularly.
Before an HVAC expert comes to your home to do any repair work, walk around the home and check out the temps in every room. Find out which rooms are hot and which are cold. That knowledge can help the technician figure out what is going on.
Clean the debris off your outdoor condenser unit. Things pile up after storms and damage your system. It could overheat and cause a disaster with your unit.
Clean your condenser’s fan blades and coils come spring. Make sure your power is off before doing more than cleaning, such as working on the unit. Remove leaves and debris from the outside condenser.
Make sure that you do not cover your outdoor components with grass clippings when you are trimming the grass. Aim the grass in a different direction from the unit. If you’re blowing leaves, this same problem can occur, so make sure you move around the unit and blow the leaves away from it.
Don’t get grass clippings on your outside unit. Shoot the grass away from the unit. This same tip applies when you are blowing fallen leaves around the yard. Grass and leaves pose a serious problem for the internal functioning of your unit.
Lubricate your fan condenser if it has oil ports. You’ll see that the ports here are closed with a rubber or metal cap. Choose an oil graded SAE 20, it is non-detergent and lightweight. Place about 10 drops into each of the ports, taking care that it does not overfill.
The HVAC unit in your home can become damaged from falling leaves. Clean outdoor units often to remove leaves. If your fan is obstructed, it can keep your system from working properly.
Find a place that is shaded for your compressor. When the unit sucks in cooler air, then less work is required to cool it further which in turn boosts the units efficiency.
Now that you have read the article, you should see how important it is to keep your HVAC system in good working order. By failing to do routine inspections, you’re setting yourself up for failure. Thankfully you found this article, and now you’re able to use the awesome tips here to assist you in figuring out what to do with your HVAC system.
Put your outdoor unit in places with shade. You save money this way because the air conditioner is now pulling in cooler air, which is easier to cool further.
https://greenleafair.com/product/4-ton-trane-xr-16-seer-condenser/
https://greenleafair.com/product-category/trane-systems/
https://greenleafair.com/product/4-ton-trane-xr-16-seer-condenser/
–
–
Micro Clean Air Duct Cleaning https://www.microcleandfw.com/