Before making that repair phone call, make sure you know the specifics about your particular system. Write down the make, model, and any maintenance history. This information will be helpful to any contractor you hire to repair it.
When the topic of HVAC comes up, it can seem extremely complicated. This is because of the technical nature of these systems. However, there is a lot of information out there that you may not be aware of that can make this easier to learn about.
When you call an HVAC system for help, you need to be aware of what you need them to do before calling. If you can’t describe the problem, you may not get an accurate quote. If you can’t explain anything to them, this will be even more difficult. So, have this information ready.
Always make sure you are up-to-date about your HVAC unit. It is important to understand what model it is and which brand it is. Also, if it has been serviced before, you should have that information handy. This will help you give the new contractor the necessary information.
In order to keep your outside condenser fan running efficiently, make sure the coils and the fan blades are cleaned before the cooling season begins. Turn off the power if you are going to work on your HVAC system. Remove leaves and debris from the outside condenser.
If your HVAC system us giving you issues, take a look around the house prior to calling a contractor. Note which rooms are hot and which are cold. This will help the repairman determine what the problem is.
If the outside of your home has condenser units, ensure they are constantly cleaned. Debris can pile up at rates that increase during rainy or windy weather, and this can foul up the inner workings of your system. It will damage the system by overheating.
Clean the debris off your outdoor condenser unit. You don’t know when things are going to pile up, like right after it’s windy or rains, and that can ruin your system. It can cause your system to malfunction by overheating.
Clean your condenser’s fan blades and coil in the spring. Don’t forget to disconnect the power first. Then you need to get the grill popped off and get the blades out so you can clean them and your unit gently.
Cover your unit when you are mowing the lawn. Shoot the grass away from the unit. Also do this when blowing leaves or shoveling snow.
Make sure clippings don’t get on your outdoor units when your mowing your lawn. Get the grass shot away from your unit. Do the same when blowing snow or leaves.
If you have a fan condenser with oil ports, it needs to be lubricated every year. These ports are typically covered with caps made of metal or rubber. Get an oil that is SAE 20 and put about 10 drops into each port, but don’t overfill it.
If the condenser fan has oil parts, then you need to lubricate it at least once per year. A rubber or metal cap is typically placed over such ports. Use a lightweight, detergent-free SAE 20 oil, putting 10 drops in each port.
If you can choose the place where your outdoor compressor goes, pick a spot with lots of shade. When your unit takes in cool air, it takes less energy to tool the air, thus boosting efficiency.
A shady spot is always a good choice for the placement of your outdoor compressor. The cooler the air which goes in, the less work the unit will have to do.
We hope this article has helped you familiarize yourself with the HVAC unit. Sometimes it can be difficult if you are not motivated to learn, so you have to keep that in mind. You will be happy you found this article.
Once it gets cold outside, you should turn off the outdoor condenser unit. If you get into temperatures that are less than 60 degrees you need the unit to be shut off so it doesn’t get damaged. You will save in repair bills and increase the efficiency of your system.
Micro Clean Air Duct Cleaning https://www.microcleandfw.com/