Clean the coils of your condenser fan each month. Except when cleaning the outside, turn the unit off when performing any type of maintenance. Clean the outdoor condenser as well.
Nothing is worse than your HVAC systems going out on a bitterly cold day or a sweltering hot day. Learning about HVAC systems in advance will help you when it needs repair. Keep reading to start doing just that.
Clean the coils on the condenser fan from time to time. Before you do so, shut off the power to ensure that none of the parts will move while you work on it. Next, remove the grill, take the blades and clean them gently, then clean the actual unit.
Cleaning the blades and coils will help the system run better. The power to the unit should be removed before you begin any maintenance, even cleaning. If you see debris, get rid of it.
When you mow your lawn, take care that you don’t get grass clippings all over your outdoor unit. Make sure the grass does not get in your unit. The same goes for blowing leaves, so always be careful if you are moving debris near your HVAC devices.
If your unit is outdoors, clean them regularly. Debris can pile up at rates that increase during rainy or windy weather, and this can foul up the inner workings of your system. If you do not, the unit may get too hot and cause additional problems.
When the trees are losing their leaves, your HVAC unit can suffer. When you see nearby trees shedding their leaves, clean the fan grill on your unit constantly. The fan should have a clear path for air to come in. If it is blocked, your system will suffer.
Clean the fan blades and coils on the condenser fan every spring. Turn the power off so nothing moves. Remove the grill and the blades, and then you can give them all a gentle clean.
If there are oil ports on your fan condenser, lubricate it annually. You’ll find these ports are covered with a metal or rubber cap. Use a lightweight oil and do not overfill them.
Keep your outdoor units free of debris when you are mowing the lawn. Make certain the debris goes away from it. The same should happen if you are blowing leaves, so be especially careful when you are going by your exterior HVAC devices whenever you are moving debris.
Find a place that is shaded for your compressor. The cooler the air which goes in, the less work the unit will have to do.
Some fan condensers may contain oil parts, and if yours does, ensure it is lubricated at least once per year. These ports have a metal covering. Sometimes it is rubber. Choose a SAE 20 oil whch is lightweight and non-detergent and place 10 drops or less into each port, ensuring it doesn’t overfill.
If the current location of your HVAC unit outside isn’t working, try having it moved to an area with more shade. As it brings in cool air to cool, you will save a lot of money.
Find a place that is shaded for your compressor. The cooler the air that the unit is able to access, the less work it has to perform.
As the temperature outside drops, remember to turn off your outdoor condenser unit. When the temperature drops beneath 60 degrees, it’s time to cut off the unit to prevent damage. This will maximize the life of your unit.
You may feel a bit overwhelmed when your system needs maintenance. When you start the search armed with good information, it is much simpler and quicker. It is hoped you are now prepared for any future issues with your system.
If you can, use double-paned windows instead of single-paned ones. Double pane windows will allow you to use less air during the summer because cooler air will stay in your house. This also works during the cold months to keep the warm air inside.
Micro Clean Air Duct Cleaning https://www.microcleandfw.com/