Get all of the details regarding a broken system before calling for repair. Learn the brand and the model. This helps make sure the contractor has the information they will need.
It is easy to ignore an HVAC system until it breaks down. That is when it becomes important. It can be confusing to understand which company should hire to work on your system. This article will make the process easier.
Before you choose an HVAC contractor, have an idea in your mind of what needs to be done. This will make the quote process much easier. If you don’t have any idea, they will have trouble giving you any sort of quote. Understand this information beforehand.
Always make sure you are up-to-date about your HVAC unit. Write down what brand your system is along with the model number and, if they’re available, maintenance records. If you have to have someone come out to repair the unit, you will be able to help the contractor understand more about what is going on.
A big mistake that people make is cutting the grass next to the outdoor condenser unit and allowing all of the clippings to blow inside the fan and coil. Now so the grass clippings are shot away from your unit. If you’re blowing leaves, this same problem can occur, so make sure you move around the unit and blow the leaves away from it.
Each spring it’s time to clean the inside of your condenser unit, including the fan and the sensitive coil. Shut the power off before you do anything. Then, remove the grill, then remove the blades and begin the cleaning process of the blades and the unit.
The operation of your HVAC system can be in danger when the tree leaves begin to fall. Clean outdoor units often to remove leaves. The air needs to be unobstructed into the fan, and any blockages create performance issues for the whole system.
Lubricate the oil ports on your condenser once each year. You can find these ports covered with rubber or metal caps. Buy an SAE 20 product that is lightweight, and then put no more than ten drops into the ports.
If the fan condenser on your unit has ports for oil, make sure you lubricate it once a year. A rubber or metal cap is typically placed over such ports. Choose a SAE 20 oil whch is lightweight and non-detergent and place 10 drops or less into each port, ensuring it doesn’t overfill.
Hvac System
Be sure to place your outdoor unit in a shady spot to maximize efficiency. It will help you save on your energy bill when you do this.
It is very important that your HVAC system is serviced two times a year. The normally recommended time for HVAC system inspections is once before the peak cooling season when it gets hot and you’ll be using your AC, and once before the peak heating season, during the cold months when you’re likely to be using your heat. Even if you can’t see anything wrong, checking it may help you locate and repair some possible issues.
When it gets cold outside, it is necessary to turn off outdoor condenser units. If it’s lower than 60 degrees, the time has come to turn it off. This will help keep it in good condition for many years.
You should know be more aware about your HAVC system. Whenever you need work done on your unit, or need to have the entire system replaced, you now know the best way to handle the situation. Use what you’ve just learned to make it a simple process.
It is always a good idea to swap out single pane windows for double pane ones. Having double pane windows allows your air conditioning unit to be run much less during the summer, because the cool air is kept inside the home. This will help you save a lot of money.
https://greenleafair.com/product/4-ton-trane-xr-16-seer-condenser/
https://greenleafair.com/product-category/trane-systems/
https://greenleafair.com/product/4-ton-trane-xr-16-seer-condenser/
–
–
Micro Clean Air Duct Cleaning https://www.microcleandfw.com/