Inspect the temps in your home before you call a service to help you with any HVAC issues you’re having. Jot down the rooms that are hot and the ones that are cold. Figuring this out will the contractor to diagnose the issues and quickly get to work on fixing it.
When the topic of HVAC comes up, it can seem extremely complicated. There is indeed lots to think about surrounding this subject. However, there are some basics that will make this topic much easier for you.
Clean your fan and coils when the weather begins to warm. Make sure your power is off before doing more than cleaning, such as working on the unit. Also, be sure to clear leaves and debris from your condenser unit.
Before calling someone to repair your system, make sure you know what kind of HVAC system you actually have. Know what the manufacturer’s name is, which particular model you have and what’s gone on with the unit in the past. The contractor will likely need all of this information.
Clean the fan blades and coils on the condenser fan every spring. For safety, always turn the power off first. Then, take the grill off, pull the blades out, and gently clean them as well as the unit itself.
If your HVAC doesn’t seem to be working properly, check things out yourself prior to calling in a technician. Figure out which rooms are hot and cold. This gives the repairer a starting point to work from.
If the fan condenser on your unit has ports for oil, make sure you lubricate it once a year. You’ll find these ports are covered with a metal or rubber cap. Put 10 drops of lightweight, non-detergent SAE oil in each port. Be careful not to use too much.
When you call an HVAC system for help, you need to be aware of what you need them to do before calling. It is going to be hard to get a price estimate on the phone if the current system isn’t something they’ve seen. They also won’t be able to offer you a quote if they don’t have a detailed idea of what you want done. Make an effort to gather all information you need before making the phone call.
When colder weather arrives, switch off all outdoor condenser units. To avoid damage, units should be turned off when temperatures are below 60 degrees. This can ensure your unit is working well throughout the years without the cost of repairs.
Clean the debris off your outdoor condenser unit. After a wind or rain storm things may pile up, causing problems with your system. It may begin to overheat, causing massive damage.
If you are a home owner, replace whatever single pane windows you have with more efficient double-paned versions. Try to insulate your windows to prevent air from being lost. It also facilitates heat retention in winter.
Don’t let grass clippings pile up against your outdoor condenser. Turn your lawnmower in the opposite direction. The same should happen if you are blowing leaves, so be especially careful when you are going by your exterior HVAC devices whenever you are moving debris.
A good way to save money with your air conditioning is by installing a programmable thermostat. If you adjust it to keep the house a little warmer or a little cooler during the time you are sleeping, you may see your energy bill go down by as much as ten percent. Plus, some models allow you to control them over the internet or from a smartphone.
Familiarizing yourself with HVAC topics should have happened easily, all thanks to reading this piece. You can start getting the most out of your unit by choosing to follow the great advice outlined in this article. You won’t be sorry you did, especially when it clicks in your mind!
If you’re away from home during the day, raise the temperature setting on your air conditioner to save money. This will save you money on your energy bills. However, leaving it on increases your electric bill and wear and tear on the system.
Micro Clean Air Duct Cleaning https://www.microcleandfw.com/